Click to enlarge

Docherty's Vitreous Enamel Flue Pipe

Available Options:
Diameter:
Diameter ":
Length:

Product Features

A single skin, high quality vitreous enamel flue pipe system.Made from two coats of internally and externally coated vitreous enamelled lowcarbon steel.For use as flue pipe connection for domestic and commercial heating appliances.To enable the removal of an appliance without the need to disturb the flue, an adjustable length, long tail adaptor or top hat adaptor can be used.Suitable for oil, gas and all solid fuels.Finished steel has an internal and external vitreous enamel coating which meets resistance requirements for heat and acid.Available as straight pipe lengths with fittings and accessories. Available in five diameters.Low installation costs.Easily and rapidly assembled.Unsuitable for condensing appliances.

Fixed straight lengths are available in four nominal metric sizes: 300mm (1ft), 600mm (2ft), 900mm (3ft), and

1200mm (4ft). Actual installed length allowing for spigot and socket connection is approximately 30mm

(11/4in) less.

All straight lengths are also available with a stainless steel cleaning access door located in the centre

and complete with a ceramic fibre gasket and dome nuts.

Product Specification

Wall Mounting:    No
Hearth Mounting:    No
Stove Fuel Type:    N/A
LPG Gas Type:    No
Natural Gas Type:    No
Power Flue:    No
Precast Flue:    No
Prefabricated Flue:    No
Chimney Flue:    No